Heavy Duty Heat Resistant Superalloy Plate GH3044 5-30mm for Gas Turbine Guide Vanes
Engineered for severe hot-gas path environments, our heavy duty GH3044 heat resistant superalloy plate (5-30mm) provides high structural stability, superior oxidation resistance up to 1200°C, and excellent thermal fatigue endurance for gas turbine guide vanes and industrial combustors.
- Overview
- Specifications
- Features
- Applications
- Why-Us
- FAQ
- Recommended Products
Product Overview
Engineered for Severe Gas Turbine Guide Vane Operating Environments
Gas turbine static guide vanes, nozzle rings, and flame transition ducts operate under extreme thermo-mechanical stresses, severe thermal cycling, and continuous high-velocity hot gas erosion. Heavy duty GH3044 heat resistant superalloy plate addresses these critical engineering demands through a high-chromium matrix (23.5%–26.5%) that generates a dense, self-healing oxide barrier, combined with heavy tungsten solid-solution reinforcement (13.0%–16.0%) that maintains high load-bearing capability and dimensional stability beyond 1000°C where standard heat-resistant alloys degrade.
Vacuum Metallurgical Integrity and Precision Hot-Rolling Manufacturing
Manufactured through dual-vacuum melting (Vacuum Induction Melting followed by Electroslag Remelting or Vacuum Arc Remelting), our heavy duty GH3044 heat resistant superalloy plate maintains ultra-clean grain boundaries, low inclusion content, and an isotropic mechanical profile. Precision multi-pass hot rolling and automated tension leveling guarantee tight thickness tolerances, minimal residual stress, and smooth, defect-free plate surfaces that facilitate flawless laser cutting, hot stamping, and deep-penetration welding for turbine component assemblies.

Technical Specifications and Parameter Matrix
| Parameter | Standard Value / Specification Range |
|---|---|
| Material Grade | GH3044 / Solid Solution Ni-Cr-W High Temperature Superalloy |
| Chemical Composition (wt. %) | Ni: Balance, Cr: 23.50–26.50, W: 13.00–16.00, Mo: ≤ 1.50, C: ≤ 0.10, Ti: 0.30–0.70, Al: ≤ 0.50, Fe: ≤ 4.00, Si: ≤ 0.60, Mn: ≤ 0.50, P: ≤ 0.015, S: ≤ 0.012 |
| Thickness Range | 5.0mm to 30.0mm (Custom heavy plate gauges available) |
| Width Range | 1000mm to 2000mm (Precision CNC shearing and plasma cutting) |
| Length Range | 2000mm to 6000mm (Cut-to-length custom plate processing) |
| Delivery Temper | Solution Annealed (Descaled, Pickled, Sandblasted, or Ground) |
| Surface Roughness (Ra) | Ra ≤ 3.2 µm (Pickled finish) / Ra ≤ 1.6 µm (Precision ground finish) |
| Edge Condition | Sheared Edge, Waterjet Cut Edge, CNC Beveled Weld Edge |
| Density | 8.89 g/cm³ |
| Melting Point | 1352°C to 1405°C |
| Thermal Conductivity (1000°C) | 26.4 W/(m·K) |
| Electrical Resistivity (20°C) | 1.25 µΩ·m |
| Tensile Strength (20°C) | ≥ 700 MPa (Solution Treated Condition) |
| Yield Strength (0.2% Offset, 20°C) | ≥ 300 MPa |
| Elongation (A50mm, 20°C) | ≥ 35% |
| High Temperature Tensile Strength (1000°C) | ≥ 120 MPa |
| Hardness Range | ≤ 220 HBW |
| Internal Soundness | 100% High-Resolution Ultrasonic Inspected (Zero internal micro-cracks) |
Key Features
Exceptional High-Temperature Oxidation Resistance up to 1200°C
The high chromium content of heavy duty GH3044 heat resistant superalloy plate generates an adherent, continuous protective oxide film under sustained elevated temperatures. This dense oxide scale prevents deep oxidative spallation and hot corrosion in aggressive fuel combustion streams, significantly extending the service life of gas turbine guide vanes.
Solid-Solution Tungsten Matrix Strengthening
Fortified with 13.0% to 16.0% tungsten dissolved directly into the austenitic nickel matrix, heavy duty GH3044 heat resistant superalloy plate demonstrates superior creep-rupture strength and high structural rigidity at 900°C–1150°C without risk of embrittling intermetallic phase precipitation during prolonged thermal exposure.
High Formability and Thermal Fatigue Resistance
Despite its high alloy density, heavy duty GH3044 heat resistant superalloy plate maintains excellent room-temperature plasticity with elongation exceeding 35%. This high ductility enables complex hot stamping, plate bending, and contour forming for aerodynamic vane profiles without edge tearing or micro-cracking.
Advanced Weldability for Critical Turbomachinery Assemblies
With low carbon and strictly controlled micro-trace elements, heavy duty GH3044 heat resistant superalloy plate delivers superior resistance to weld solidification cracking and heat-affected zone micro-fissuring during Gas Tungsten Arc Welding (TIG), Plasma Arc Welding, and Electron Beam Welding processes.

Industrial Applications
Gas Turbine Static Guide Vanes and Nozzle Rings
Serves as the primary structural material for high-temperature stationary nozzle guide vanes, shroud segments, and aerodynamic flow deflectors in industrial gas turbines and heavy-duty combined-cycle power generators.
Aero-Engine Combustor Liners and Flame Holders
Applied in combustion chamber liners, flame tubes, swirlers, and afterburner thermal shielding structures requiring high thermal shock resistance and continuous anti-erosion performance.
Industrial Heat Recovery Systems and High-Temperature Recuperators
Utilized in heavy recuperator heat exchanger plates, burner nozzles, and radiant furnace baffles operating in continuous thermal processing lines and petrochem cracking units.
Thermal Processing Furnace Muffles and Radiant Heat Shields
Engineered for long-life industrial annealing muffles, furnace conveyor pans, and reflective thermal barriers exposed to high thermal cycling and carburizing furnace atmospheres.

Why Choose DLX for Heavy Duty Superalloy Plates
Integrated Dual-Vacuum Melting and High-Purity Refining Capability
DLX operates complete internal production lines encompassing vacuum induction melting (VIM), electroslag remelting (ESR), heavy hot plate rolling mills, and multi-roller hydraulic plate levelers. This end-to-end metallurgical control ensures ultra-high compositional purity, minimal gas content, and batch-to-batch structural uniformity.
Precision Net-Shape Plate Cutting and Beveling Facilities
Equipped with heavy CNC abrasive waterjet cutting, high-definition plasma cutting, and CNC plate beveling lines, DLX delivers custom-cut vane blanks and contoured shapes directly to CAD/STEP drawing specifications, reducing machining scrap and production cycle times for turbomachinery fabricators.
Reliable Monthly Production Capacity of 1,200 Tons
With a consolidated manufacturing capacity of 1,200 tons per month across high-temperature nickel and superalloy plate lines, DLX provides dynamic minimum order quantities (MOQ) and dependable delivery schedules for both prototype pilot trials and large-scale industrial turbine maintenance contracts.
Comprehensive In-House High-Temperature and Non-Destructive Quality Verification
Every production heat and rolled plate lot is verified for chemical composition via glow discharge mass spectrometry and direct-reading spectrometers, room and elevated temperature tensile strength, high-temperature creep-rupture capability, micro-hardness distribution, and 100% full-body ultrasonic defect scanning prior to dispatch.

Product FAQ
Why is heavy duty GH3044 superalloy plate preferred over standard austenitic stainless steel for gas turbine guide vanes?
Austenitic stainless steels suffer rapid oxidation, grain coarsening, and severe creep deformation at temperatures exceeding 850°C. Heavy duty GH3044 heat resistant superalloy plate is specifically alloyed with 23.5–26.5% Cr and 13–16% W, providing continuous oxidation resistance up to 1200°C and stable load-bearing strength under aggressive thermal shock and hot gas flow.
What dimensional thicknesses and cutting tolerances are achievable for 5-30mm heavy plates?
Heavy duty GH3044 heat resistant superalloy plates are supplied in thickness increments from 5.0mm up to 30.0mm with tight thickness tolerances controlled within ±0.20mm to ±0.35mm. Custom CNC waterjet cutting and plasma cutting provide edge dimensional tolerances down to ±0.5mm, ensuring drop-in readiness for vane machining.
What welding procedures and filler materials are recommended for heavy duty GH3044 plate fabrication?
Heavy duty GH3044 heat resistant superalloy plate is readily weldable using Gas Tungsten Arc Welding (TIG), Plasma Arc Welding, or Electron Beam Welding. Matching composition filler wire is recommended. Low heat input and controlled interpass temperatures below 100°C maintain microstructural homogeneity and optimize joint mechanical efficiency.
What surface finishes are available for heavy duty GH3044 plate orders?
Plates are standardly delivered in hot-rolled, solution-annealed, and descaled/pickled condition with a uniform matte finish. Precision abrasive sandblasting or ground finishes with surface roughness down to Ra ≤ 1.6 µm are available upon engineering request.
What is the export packaging standard for heavy duty GH3044 superalloy plates?
All plates are packaged with interleaved surface protective sheets, secured with heavy steel strapping, wrapped in multi-layer waterproof barrier film, and housed in reinforced, fumigated solid wooden crates to ensure zero deformation or moisture damage during international maritime and air transportation.

