Changzhou DLX Alloy Co., Ltd.

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Mobile
Message
0/1000
High Temperature Alloy

Home /  Products /  High Temperature Alloy

Formable Superalloy Sheet GH3030 Cold Rolled 0.8-2.5mm for Aero Afterburner

Engineered for aero-engine afterburners and combustion liners, DLX GH3030 cold rolled superalloy sheet delivers superior deep-drawing capability, uniform grain structure, and reliable thermal fatigue strength below 800°C.

Brand:
DLX
Spu:
GH3030
  • Overview
  • Specifications
  • Features
  • Applications
  • Why-Us
  • FAQ
  • Recommended Products

Product Overview

In high-velocity, fluctuating-temperature environments like aero-engine afterburners and industrial thermal zones, sheet materials face severe thermal shock, cyclic oxidation, and mechanical vibration. Standard stainless steels and low-grade nickel alloys suffer rapid grain coarsening, edge cracking during deep drawing, and premature creep rupture.

DLX GH3030 cold-rolled sheet resolves these challenges through ultra-pure vacuum induction melting and electroslag remelting (VIM + ESR) refining. With a single-phase austenitic matrix stabilized by controlled micro-additions of titanium and chromium, it provides:

  • Stable High-Temperature Operation: Outstanding oxidation and corrosion resistance in combustion atmospheres up to 800°C (short-term exposure up to 1000°C).

  • Exceptional Deep-Drawing Performance: High elongation and low work-hardening tendency allow multi-stage cold forming without intermediate process annealing.

  • Seamless Weldability: Fully compatible with automated TIG (argon arc), seam, and resistance spot welding without hot cracking tendencies.

GH3030 superalloy sheet Customized service available

Technical Specifications

Chemical Composition (Mass Fraction, %)

Element Ni Cr Ti C Fe Mn Si P S Al
Standard Min Balance 19.0 0.15 — — — — — — —
Standard Max Balance 22.0 0.35 0.12 1.50 0.70 0.80 0.030 0.020 0.15
DLX Controlled ≥75.0 20.0–21.5 0.20–0.30 ≤0.08 ≤1.00 ≤0.50 ≤0.60 ≤0.015 ≤0.010 ≤0.10

Room Temperature & Elevated Mechanical Properties (Solution Treated State)

Property Parameter Testing Condition Typical Value DLX Guaranteed Baseline
Tensile Strength (Rm) Room Temp (20°C) 730–820 MPa ≥685 MPa
Yield Strength (Rp0.2) Room Temp (20°C) 330–380 MPa ≥295 MPa
Elongation at Break (A5) Room Temp (20°C) 42–48% ≥35%
Hardness (HV / HRB) Room Temp (20°C) 160–185 HV ≤90 HRB
High-Temp Tensile (Rm) 800°C ≥210 MPa ≥195 MPa
Cold Bending Angle d=1a, 180° Bending No Cracking 180∘ Pass

Physical & Thermal Properties

Property Metric Value Property Metric Value
Density 8.40 g/cm3 Melting Range 1374∘C−1420∘C
Specific Heat (20∘C) 435 J/(kg⋅K) Curie Temperature Non-magnetic (<−196∘C)
Thermal Conductivity (20–800∘C) 13.8–24.2 W/(m⋅K) Microstructure Single-Phase Austenite

Dimensional Capabilities & Tolerances

  • Thickness Range: 0.80mm – 2.50mm (Cold Rolled, Bright Annealed / Pickled)

  • Width Range: 100mm – 1200mm (Slit strip & Full width coils/sheets)

  • Length Range: 500mm – 3000mm (Cut-to-length custom sheets)

  • Thickness Tolerance: to (Precision Grade)

  • Surface Finish: 2B, BA (Bright Annealed), or Satin Descaled, free from slivers, micro-cracks, and rolling scratches.

2(fb960be797).jpg

Key Engineering Features & LSI Headings

High Formability Superalloy Sheet with Superior Deep-Drawing Ductility

Engineered with an ultra-fine, uniform austenitic grain size (ASTM Grain Size 7–8), DLX GH3030 cold-rolled strip exhibits exceptional planar isotropy. It allows extreme drawing ratios (LDR>2.1), deep stamping, and spinning of complex cylindrical afterburner nozzles and corrugated heat shields without directional tearing or orange-peel surface degradation.

Long-Term Thermal Shock & Oxidation Resistance below 800°C

The high chromium content (19.0%–22.0%) forms a dense, self-healing Cr2O3 protective layer on the sheet surface when exposed to hot oxidizing and combustion gas flows. This prevents internal oxidation and scaling up to 800°C continuous service, ensuring structural reliability under frequent thermal cycling.

Metallurgical Purity via Dual VIM+ESR Vacuum Melting

Every batch undergoes double-vacuum metallurgical processing (VIM + ESR) to minimize harmful trace tramp elements (P,S,Pb,Bi,Sb,As<10 ppm). This ensures clean grain boundaries, prevents micro-segregation, and guarantees 100% flaw-free automated welding during component assembly.

Precision Gauge Control and Stress-Relieved Flatness

Utilizing multi-roller Sendzimir precision rolling mills and continuous bright-annealing tension levelers, our GH3030 sheets achieve tight thickness tolerances (±0.02mm) and superior flatness (≤3mm/m), minimizing laser cutting setup time and stamping scrap rates.

GH3030 superalloy sheet comparison

Industrial & Aerospace Applications

Aerospace Propulsion & Aero-Engine Hot-Section Assemblies

  • Afterburner Diffusers and Flame Holders: Withstands intense acoustic vibration and transient hot gas gusts during military and civil engine operation.

  • Combustion Chamber Liners & Flame Tubes: Resists localized thermal fatigue and oxidation under steady radiative heat flux.

  • Exhaust Nozzle Fairings & Thermal Shields: Delivers structural rigidity while maintaining light weight through thin-gauge (0.8–1.5mm) precision design.

High-Performance Industrial Thermal Engineering

  • Gas Turbine Transition Ducts & Swirlers: Long-life operation in land-based power turbines and marine propulsion packages.

  • Industrial Furnace Fixtures & Radiant Tubes: Chemical heat-treating fixtures, annealing baskets, and furnace baffles exposed to cyclic heating.

  • High-Temperature Chemical Reactor Internal Baffles: Corrosion resistance against high-temperature oxidizing media and hydrocarbon gases.

GH3030 superalloy sheet application field

Why Choose DLX

Scalable Superalloy Manufacturing with 1,200 Tons Monthly Capacity

Changzhou DLX Alloy Co., Ltd. (DLX) is an advanced manufacturer specializing in high-temperature superalloys, corrosion-resistant alloys, and precision resistance materials. Operating modern melting, hot-forging, precision cold-rolling, and bright-annealing production lines, DLX delivers 1,200 tons/month of high-performance alloy products to global OEM manufacturers and engineering contractors.

End-to-End Quality Assurance & Zero-Defect B2B Supply

  • Integrated Metallurgical Control: Complete in-house process from vacuum induction melting (VIM), electroslag remelting (ESR), Sendzimir cold rolling, to continuous protective-atmosphere annealing.

  • 100% Batch Inspection: Full optical emission spectrometer (OES) analysis, room & elevated temperature tensile testing, 180° cold bend validation, eddy-current and ultrasonic non-destructive testing (NDT).

  • B2B Engineering Collaboration: Customized slitting, cut-to-length sheet flattening, laser-cutting blanks, and batch-traceable inspection certificates provided with every dispatch.

production plant3bba44a7b1ce34b6e7edc97f2294e21a(f7f8c2d9f9).png

Product FAQ

Q1: What makes GH3030 sheet especially suitable for aero-engine afterburner parts?

A: GH3030 provides an optimal combination of high room-temperature ductility (elongation ≥35%), outstanding oxidation resistance below 800°C, and exceptional weldability. These properties allow manufacturers to deep-draw thin-gauge (0.8–2.5mm) complex aerodynamic shapes while ensuring long fatigue life under cyclic high-temperature combustion environments.

Q2: What is the recommended forming and heat treatment procedure for GH3030 cold-rolled sheet?

A: GH3030 is normally supplied in the solution-annealed condition (1000∘C–1080∘C air or water cooling), ready for direct stamping or cold rolling. For heavy multi-stage deep drawing, intermediate process annealing at 1000∘C–1050∘C with fast cooling is recommended if cumulative cold deformation exceeds 50%.

Q3: How does GH3030 perform during TIG and resistance seam welding?

A: Because GH3030 is a solid-solution strengthened single-phase alloy with low carbon and strictly controlled micro-trace elements, it has virtually no susceptibility to hot cracking or strain-age cracking during TIG (argon arc) welding, resistance spot welding, or seam welding.

Q4: What thickness ranges and edge conditions can DLX supply for GH3030 sheets?

A: DLX supplies cold-rolled GH3030 sheets and coils from 0.80mm to 2.50mm in width up to 1200mm. Edge conditions include slit edge, deburred edge, and precision sheared flat sheets tailored to automated robotic feeding systems.

OEM servicesGH3030 superalloy sheet recommended products

Inquiry Inquiry
WhatsApp WhatsApp E-mail E-mail formable superalloy sheet gh3030 cold rolled 0 8 2 5mm-0